Lenovo ThinkStation P500 User Manual page 77

3. Depending on whether you are using a USB key or an Android device (such as a smartphone), do
one of the following:
• If you are using a USB key, go to http://support.lenovo.com/workstation_diagnostics for information
about how to read the error data on the USB key.
• If you are using an Android device with the Lenovo Workstation Diagnostics app installed, open the
application for details about the error. For more information on the Lenovo Workstation Diagnostics
app, go to http://www.thinkworkstationsoftware.com/diags
For more information about how to use the diagnostic USB connector on your computer,
decipher the error codes, or use the Lenovo Workstation Diagnostics app, go to
http://www.thinkworkstationsoftware.com/diags.
The hardware diagnostic function is enabled on your computer by default. To disable the function, do
the following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 37.
2. From the Setup Utility program main menu, select Advanced ➙ Diagnostic function, and then press
Enter.
3. Select Real-time Diagnostic Monitoring and press Enter. Then select Disabled and press Enter.
4. Press F10 to save changes and exit the Setup Utility program.
.
Chapter 7 Troubleshooting and diagnostics
65