Toyota Sienna Manual page 58

®
2. Bluetooth SETTINGS
No. Information
Select to set Bluetooth
connection on/off.
Displayed system name
can be changed to a de-
sired name.
PIN-code used when the
®
Bluetooth device was reg-
istered. It can changed to a
desired code.
Device address is unique
to the device and cannot be
changed.
Select to set the phone
connection status display
on/off.
Select to set the connec-
tion status display of the
audio player on/off.
Compatibility profile of the
system device.
Select to reset all setup
items.
58
CHANGING "Bluetooth*
Page
Power"
®
58
1
Select "Bluetooth* Power".
When "Bluetooth* Power" is on:
58
Vehicles without a smart key system
The Bluetooth
connected when the engine switch is
turned to the "ACC" or "ON" position.
58
Vehicles with a smart key system
The Bluetooth
connected when the engine switch is

turned to ACCESSORY or IGNITION
ON mode.
When "Bluetooth* Power" is off:

The Bluetooth
and the system will not connect to it next
time.

INFORMATION
● While driving, the auto connection state

can be changed from off to on, but can-
not be changed from on to off.

EDITING THE Bluetooth* NAME
1
Select "Bluetooth* Name".
2
Enter a name and select "OK".
EDITING THE PIN-CODE
1
Select "Bluetooth* PIN".
2
Enter a PIN-code and select "OK".
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
SIENNA_Navi+MM_OM08015U_(U)
®
device is automatically
®
device is automatically
®
device is disconnected,
15.09.16 18:08