Checking Messages - Toyota Sienna Manual

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

CHECKING MESSAGES

1
Display the message inbox screen.
(P.239)
2
Select the desired message from the
list.
3
Check that the message is displayed.
No. Function
Select "Mark Unread" or "Mark
Read" to mark mail unread or read
on the message inbox screen.
*
This function is available when "Up-
date Read Status on Phone" is set to
on. (P.254)
Select to reply
(P.242)
Select to display the previous or
next message.
Select to have messages read out.
To cancel this function, select
"Stop".
When "Automatic Message Read-
out" is set to on, messages will be
automatically read out. (P.254)
Select to make a call to the sender.
*: E-mail only
INFORMATION
●
Reading a text message is not available
while driving.
●
Depending on the type of Bluetooth
phone being connected, it may be
necessary to perform additional steps on
the phone.
●
Messages
appropriate
phone's registered mail address folder.
Select the tab of the desired folder to be
displayed.
● Only
connected Bluetooth
displayed.
●
The text of the message is not displayed
while driving.
●
Turn the "PWR
volume control switch on the steering
wheel to adjust the message read out
volume.
the message.
SIENNA_Navi+MM_OM08015U_(U)
are displayed in
connected Bluetooth
received messages on
®
phone can be
·
VOL" knob, or use the
15.09.16
®
the
®
the
7
241
18:08