Toyota Sienna Manual page 55

■
AUTO CONNECTION MODE
To turn auto connection mode on, set
"Bluetooth* Power" to on. (P.57)
®
Leave the Bluetooth
tion where the connection can be es-
tablished.
Vehicles without a smart key system
 When the engine switch is in the "ACC" or
"ON" position, the system searches for a
nearby registered device.
 The system will connect with the regis-
tered device that was last connected, if it
is nearby.
Vehicles with a smart key system
 When the engine switch is in ACCES-
SORY or IGNITION ON mode, the system
searches for a nearby registered device.
 The system will connect with the regis-
tered device that was last connected, if it
is nearby.
■
CONNECTING MANUALLY
When the auto connection has failed or
"Bluetooth* Power" is turned off, it is
necessary to connect Bluetooth
ually.
1
Press the "APPS" button and select
"Setup".
2
Select "Bluetooth*".
3
Follow the steps in "CONNECTING A
®
Bluetooth DEVICE" from "STEP 2".
(P.54)
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
■
RECONNECTING THE Bluetooth
PHONE
If a Bluetooth
device in a loca-
due to poor reception from the
Bluetooth
switch is in the following, the system
automatically
Bluetooth
Vehicles without a smart key system
The engine switch is turned to the
"ACC" or "ON" position.
Vehicles with a smart key system
The engine switch is turned to ACCES-
SORY or IGNITION ON mode.
 If a Bluetooth
purpose, such as turning it off, this does
not happen. Reconnect the Bluetooth
phone manually.
®
man-
2. Bluetooth
®
phone is disconnected
®
network when the engine
reconnect
®
phone.
®
phone is disconnected on
SIENNA_Navi+MM_OM08015U_(U)
15.09.16
®
SETTINGS
®
2
the
®
55
18:08