Deleting A Bluetooth Device - Toyota Sienna Manual

 For details about operating the Bluetooth
device, see the manual that comes with it.
 To cancel the registration,
"Cancel".
4
Register the Bluetooth
®
your Bluetooth device.
 A PIN-code is not required for SSP
(Secure Simple Pairing)
®
Bluetooth devices. Depending on the
®
type of Bluetooth device being con-
nected, a message confirming registra-
tion may be displayed on the Bluetooth
device's screen. Respond and operate the
®
Bluetooth device according to the confir-
mation message.
5
Monitor connectivity screen and wait
for connection.
 The system waits for connection requests
coming from the registered device.
 At this stage, the Bluetooth
not yet available.
6
Select "OK" when the connection sta-
tus changes from "Connection wait-
ing..." to "Connected".
 If an error message is displayed, follow
the guidance on the screen to try again.
®
DELETING A Bluetooth
DEVICE
select
1
Display the "Bluetooth* Setup" screen.
®
device using
(P.51)
2
Select "Remove".
compatible 3
Select the desired device.
®
4
Select "Yes" when the confirmation
screen appears.
5
®
Check that a confirmation screen is
functions are
displayed when the operation is com-
plete.
INFORMATION
●
When deleting a Bluetooth
contact data will be deleted at the same
time.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
SIENNA_Navi+MM_OM08015U_(U)
®
2. Bluetooth SETTINGS
®
®
phone, the
53
15.09.16 18:08
2