Voice Command System Operation - Toyota Sienna Manual

INFORMATION
●
The voice command system can be
operated while guidance is being spo-
ken, when "Voice Prompt Interrupt"
(P.66) is set to on. (It is not necessary
to wait for the confirmation beep before
speaking a command.)
●
Voice commands may not be recognized
if:
• Spoken too quickly.
• Spoken at a low or high volume.
• The roof or windows are open.
• Passengers are talking while voice
commands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned
towards the microphone.
●
In the following conditions, the system
may not recognize the command prop-
erly and using voice commands may not
be possible:
• The command is incorrect or unclear.
Note that certain words, accents or
speech patterns may be difficult for the
system to recognize.
• There is excessive background noise,
such as wind noise.

1. VOICE COMMAND SYSTEM OPERATION

VOICE COMMAND SYSTEM
OPERATION
The voice command system is operat-
ed by selecting a tab corresponding to
each function. The tabs are found on
the upper part of the screen.
1
Press the talk switch.
2
Select "OK".
 Voice guidance for the voice command
system can be skipped by pressing the
talk switch.
3
Say the tab selection command or se-
lect the desired tab.
 Commands related with each function are
displayed on the screen of the each func-
tion tab. Some commonly used com-
mands are displayed on the screen of the
function tab.
SIENNA_Navi+MM_OM08015U_(U)
4
187
15.09.16 18:08