Toyota Sienna Manual page 192

1. VOICE COMMAND SYSTEM OPERATION
VOICE COMMAND EXAMPLE:
DIAL NUMBER
1
Press the talk switch.
2
Say the phone number.
 In the same manner as it is displayed on
the screen, "Dial <number>", after saying
"Dial a number" say the phone number.
 Say the phone number one digit at a time.
For example, if the phone number is
2345678:
Say "two three four five six seven
eight"
Do not say "twenty three forty five sixty
seven eight"
Calling to the following phone numbers
• 3 digit numbers (911, 411, 611)
• 7 digit numbers (Local phone numbers)
• 10 digit numbers (Area code + Local
phone number)
• 11 digit phone numbers (1 + Area code +
Local phone number)
 As the system cannot recognize additional
numbers, say the complete number with-
out stopping.
Calling to other phone numbers
3
Say or press the
"Call"
the steering wheel.
192
 When the system recognizes multiple
phone numbers, a phone number candi-
date list will be displayed on the screen.
Pressing the
wheel makes a call to the top entry on
the list. If the desired phone number is
not displayed on the top of the screen,
say the number of the desired phone
number from the candidate list to select
a phone number from the candidate list.
switch on
SIENNA_Navi+MM_OM08015U_(U)
switch on the steering
15.09.16 18:08