Toyota Sienna Manual page 247

No. Function
Select to delete contacts
*
from the contact list.
Select to reset all setup
items.
*: For PBAP compatible
phones, this function is available when
"Automatic Transfer"
(P.246)
INFORMATION
● Depending on the type of phone, certain
functions may not be available.
● Contact data is managed independently
for every registered phone. When one
phone is connected, another phone's
registered data cannot be read.
Page
250
Operation methods differ between
PBAP compatible and PBAP incom-

patible but OPP compatible Bluetooth
phones.
®
Bluetooth
If your cellular phone is neither PBAP
nor OPP compatible, the contacts can-
is set to off.
not be transferred.
■
FOR
Bluetooth
1
 Contacts are transferred automatically.
2
 This operation may be unnecessary
depending on the type of cellular phone.
 Depending on the type of cellular phone,
OBEX authentication may be required
when transferring contact data. Enter
"1234" into the Bluetooth
 If another Bluetooth
when transferring contact data, depending
on the phone, the connected Bluetooth
device may need to be disconnected.
 Depending on the type of Bluetooth
phone being connected, it may be neces-
sary to perform additional steps on the
phone.
UPDATE CONTACTS FROM
PHONE
PBAP COMPATIBLE
®
PHONES
Select "Update Contacts
Phone".
Check that a confirmation screen is
displayed when the operation is com-
plete.
®
®
device is connected
SIENNA_Navi+MM_OM08015U_(U)
15.09.16
2. SETUP
®
from
7
phone.
®
®
247
18:08