Toyota Sienna Manual page 318

4. MEMORY POINTS
REGISTERING AREAS TO
AVOID
1
Select "New".
2
Select the desired item to search for
the location. (P.284)
3
Select either
change the size of the area to be avoid-
ed and select "OK".
4
Select "OK" when the editing area to
avoid screen appears.
INFORMATION
●
If a destination is entered in the area to
avoid or the route calculation cannot be
made without running through the area
to avoid, a route passing through the
area to be avoided may be shown.
● Up to 10 locations can be registered as
points/areas to avoid.
318
EDITING AREAS TO AVOID
The name, location and/or area size of
a registered area can be edited.
1
Select "Edit".
2
Select the area and select "OK".
or to
3
Select the item to be edited.
No.
4
Select "OK".
SIENNA_Navi+MM_OM08015U_(U)
Function
Select to edit the name of
the area to avoid.
Select to set display of the
area to avoid name on/off.
Select to edit area location.
Select to edit area size.
Select to set the area to
avoid function on/off.
15.09.16
Page
319

319
319

18:08