Greasing The Spray System - Toro 41229 Operator's Manual

Greasing the Spray System

Lubricate all bearings and bushings after every 100 hours
or once a year, whichever occurs first.
Grease Type: No. 2 General Purpose Lithium Base Grease
1. Wipe the grease fitting clean so that foreign matter
cannot be forced into the bearing or bushing.
2. Pump grease into the bearing or bushing.
Important
Only a few pumps of grease are required to
lubricate the system. Do not over grease. Grease will not
purge from the system.
3. Wipe off excess grease.
Figure 35
32