Toro 41229 Operator's Manual page 35

Problem
The monitor is erratic in operation.
The displayed measurements do
not make sense.
The monitor reads "OFL."
Possible Causes
1. A two-way radio is too close to
the monitor or its cables.
1. The Units of Measurement is
set to a system other than what
you expect.
1. The data has exceeded the
maximum allowed.
35
Corrective Action
1. Keep two-way radios away
from the monitor and its cables.
1. Check the Units of
Measurement to ensure that it
is set correctly.
1. Press and hold the [Reset]
button to clear the monitor.