Panasonic DP-8060 Operating Instructions Manual page 80

■ ■ ■ ■ ■ Copier Settings
Screen
No.
01/05
02/05
03/05
04/05
05/05
NOTE
80
Downloaded From ManualsPrinter.com Manuals
Function Parameters
For Key Operator
Modes
02 Text Contrast
03 T/P Contrast
04 Photo Contrast
06 Interleaving Default
07 Page Insertion Default
08 Cover Mode Default
09 Job Build And SADF Mode
10 Maximum Copy Setting
12 M1, Size
13 M2, Size
16 Memory Overflow Warning
17 Toner Save Mode (T)
18 Toner Save Mode (T/P)
19 Toner Save Mode (P)
20 Add New Tandem Desti.
21 Edit Tandem Destination
22 Delete Tandem Desti.
23 Copier Settings Print
● The Key Operator Password is required before any changes can be made to items on this page.
∗
"Level 1 or 2" setting consumes less Toner than "None" setting, however, the copy quality will
diminish slightly.
Toner saving is based on the Panasonic 6 % density Test Chart (N910653):
Level 1: Uses approximately 10 % less Toner than None setting.
Level 2: Uses approximately 20 % less Toner than None setting.
Function
Selects contrast for Text mode.
● 1 ~ 7
Selects contrast for Text/Photo mode.
● 1 ~ 7
Selects contrast for Photo mode.
● 1 ~ 7
Selects OHP interleaving paper.
● Blank, Copy
Selects page insertion.
● Blank, Copy
Selects cover paper.
● F, Blank, F, Copy
FB, Blank, FB, Copy (F: Front, FB: Front + Back)
Enables or disables the use of SADF function.
● No, Yes
Determines whether to limit number of copies
(0-99).
Inputs a size in job memory 1 for frequently
used size.
● X: 5~432/Y: 5~297 mm
(See pages 62-63)
Inputs a size in job memory 2 for frequently used size.
● X: 5~432/Y: 5~297 mm
(See pages 62-63)
Selects the task to perform when memory
overflow occurs.
● Print, Cancel
Selects the toner save in Text mode.
● None, Level 1, Level 2 ∗
Selects the toner save in Photo/Text mode.
● None, Level 1, Level 2 ∗
Selects the toner save in Photo mode.
● None, Level 1, Level 2 ∗
Inputs a new destination to split the copy job.
Edits the split copy job destination.
Deletes the split copy job destination.
Prints the copier settings.
● Stop, Start
Initial
Setting
4
4
4
Blank
Blank
F, Blank
Yes
0
(No limit)
70 x 160 mm
(X) (Y)
95 x 220 mm
(X) (Y)
Print
None
None
None