■ ■ ■ ■ ■ Printer Settings
Screen
No.
00 Job Completion Time
01 Page Protection
02 Error Page Print
01/03
03 Spool Function
04 Text Print
05 PS Configuration Print
06 Printer Settings Print
07 Font List Print (PCL)
02/03
08 Font List Print (PS)
09 Mailbox Data Holding
10 Delete Mailbox Data
11 Print Queue Delete
03/03
12 AppleTalk Zone Name
13 NetWare
NOTE
Downloaded From ManualsPrinter.com Manuals
Modes
Sets the job completion time setting.
● 1 ~ 999 sec.
Compresses automatically and then prints out. Off
● Off, On
Sets the error page printout.
● Off, On
Sets the spool function.
● Off, On
Prints text page only.
● Off, On
Prints the PS status page. ∗
● Stop, Start
Prints the printer status.
● Stop, Start
Prints the PCL font list. ∗
● Stop, Start
Prints the PS font list. ∗
● Stop, Start
Sets the automatic holding period of mailbox
data.
● Infinity, 1 day, 2 days, 3 days, 4 days, 6 days,
Deletes the mailbox data.
● All, Before
Sets the delete authorization for the print queue. Key op.
● Free, Key op. (operator)
Inputs an AppleTalk Zone name. ∗∗
● Maximum 32 characters
Sets the NetWare Operating System. ∗∗
● Off, On (When using IPX/SPX protocol of
● The Key Operator Password is required before any changes can be made to items on this
page.
∗
Functions No. 05, 07, and 08 are available when the following options are installed.
Function No. 07: Printer Controller Module (DA-PC800)
Function No. 05 and 08: Multi Page Description language Controller Module (DA-MC800)
∗∗
When Function No. 12 or 13 is set, cycle the power by turning the Power Switch on the Left
Side of the machine OFF and ON.
Function
7 days
Novell NetWare)
Initial
Setting
180
On
On
On
7 days
Before
On
81