Detaching And Refitting The Fixing Thermostat - Kyocera FS-6020 Service Manual

FS-6020

(6) Detaching and refitting the fixing thermostat

Perform the following procedure when the fixing thermostat is to be checked or replaced.
Procedure
1. Remove the heat roller (see page 1-6-24).
2. Remove the two screws and then the terminal
plate and round terminal.
3. Remove the fixing thermostat.
4. Check or replace the fixing thermostat.
5. Refit all the removed parts.
1-6-24
Screws
Terminal plate
Fixing thermostat
Figure 1-6-29
Round terminal
Fixing A nuts