Kyocera FS-6020 Service Manual page 14

FS-6020
Transfer system .............................. Roller transfer (negative charging)
Separation system ......................... Small radius curvature separation and separation charger brush (positive charging)
Fixing system ................................. Heat roller system
Charge erasing system .................. Exposure by eraser lamp (LED)
Cleaning system ............................. Counter blade
Controller hardware ........................ CPU: Power PC405 (200 MHz)
Interface ......................................... Parallel: High-speed (bi-directional), IEEE 1284 Nibble/ECP mode
Controller software ......................... a) Emulation
Smoothing ...................................... KIR: equivalent to 2400 dpi, two levels by On and Off
Toner saving ................................... EcoPrint mode
Resolution ...................................... Fast 1200 mode: 1800 × 600 dpi
Gray scale ...................................... Fast 1200 mode: 220 levels
Dimensions .................................... Main unit: 467 × 410 × 310 mm/18
Weight ............................................ Main unit: 18 kg/39.7 lbs
1-1-2
Code ROM: 4 MB (32 Mbit × 2)
Font ROM: 4 MB (32 Mbit × 1)
Main RAM: 16 MB in standard configuration (on-board); can be expanded to 144 MB
(standard 16 MB + 128 MB) at the maximum by adding optional expansion memory
Optional expansion RAM: 1 slot
100-pin DIMM (16, 32, 64 or 128 MB)
USB: Full-Speed USB2.0
Serial (optional): RS-232C, maximum speed 115.2 Kbps
Serial interface board IB-11 must be installed.
Network (optional): 10 Base-TX/100 Base-TX/10 Base-2
Network interface card: IB-21 (10 Base-TX/100 Base-TX/10 Base-2)
Network interface card IB-21E (10 Base-TX/100 Base-TX)
Wireless LAN card IB-22 must be installed.
(1) Standard
Line Printer
IBM Proprinter X24E
Epson LQ-850
KCGL
Diablo 630
PCL6 (PCL5e + PCLXL protocol class 2.0)
(2) Option
Japanese KPDL3 (PostScript 3 compatible) UG-13
b) Fonts:
(1) Western fonts
Bitmap fonts: 1 Line Printer bitmap fonts
Outline fonts: 80 outline fonts
79 bitmap emulate downloadable font: Kyocera Mita format/HP format
c) Graphic:
(1) Raster graphic:
75, 100, 150, *200, 300, 600* dpi
(*200 dpi is supported when the resolution is 600 dpi.)
(2) Vector graphic:
Line, Box, Circle, Arc, Fill pattern etc.
(3) Bar code:
One-dimensional bar code: 45 types
Two-dimensional bar code: 1 type (PDF-417)
(4) Text:
TEXT, RTXT etc.
(5) Others:
Macro, JOBx, Device setting etc.
d) Connectivity
plug & play, Windows 95/98/ME/NT4.0/2000/XP
SNMP (KM-NET viewer)
(Available only in 600 dpi mode or fast 1200 mode; On at the factory default setting)
600 dpi mode: 600 × 600 dpi
300 dpi mode: 300 × 300 dpi
(Fast 1200 mode at the factory default setting)
600 dpi mode: 203 levels
" × 16 " × 12 " (W × D × H)
3 1 3
/ / /
8 8 16