Chef's Choice 830 WafflePro Instructions Manual page 4

Table of Contents

Advertisement

Available languages

Available languages

getting to Know the wafflepro
Take a minute to identify the key features and controls of the WafflePro
strength, high temperature engineering plastics with a polished stainless steel lid.
To open the lid, lift by the insulated front plastic handle. Electronic controls are on the control panel,
Figure 2.
Particularly important is the circular black Rocker Switch, Figures 1 and 2. Press the upper portion
of the rocker switch for a fast bake and for waffles with "Crisp Exterior/Moist Interior", or press at
the bottom of the rocker switch for a deep bake and for waffles that have a more "Uniform Texture"
throughout.
Below the rocker switch is a red light marked "Baking" to indicate when the waffle plates are being
heated. Below that is a green light marked "Ready" to indicate either the waffle plate is at baking
temperature or the waffle is "Ready" to be served.
An audible "Ready Beeper" sounds when the green light comes on to further indicate when the waffle
is ready to serve.
The color control wheel is graduated numerically. The waffle will be darker or lighter in color depend-
ing on the exact setting of this wheel and the position of the rocker switch. This control wheel is rela-
tively sensitive and fractional numerical changes can make a notable difference in color. The common
operating range for the color control is 3½ to 5. To darken the waffle, move toward a higher number.
The lid has a unique hinge that allows the back of the lid to raise slightly as needed to maintain a
uniform thickness of the waffle as it bakes and rises.
Provision has been made for cord storage as described in Storage Section. The cord can be stored
under the WafflePro
®
The WafflePro
can be stored upright to save shelf space. Simply close the lid and stand it upright
®
resting on the flat hinged end.
uSing the wafflepro
Insert the WafflePro
"baking" light will turn on immediately indicating the waffle plates are heating. Turn the co or control
dial to 4. You can shorten the warm-up time by pressing firmly the top of the black circular rocker
switch adjacent to the marking "Crisp Exterior/Moist Interior."
Figure 1. WafflePro
Taste/Texture Select
®
with its end secured in a slot molded into the base.
for the firSt time
®
power cord into a grounded 120 volt outlet and close the cover. The red
®
.
®
®
4
, (Figure 1) made of high
®
Rocker Switch
Control Panel
Handle for Lid
Color Control Dial

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

830-se wafflepro

Table of Contents