Operation
Roger Beep
1. Press [MENU/ENTER] five times. The roger beep setting flashes.
2. Turn the Rotary Channel Selector at the base or press
MIC to change the setting between ON or OFF.
3. Press [MENU/ENTER] to
store the setting.
4. Press and hold
[MENU/ENTER] to
exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.
NOTE
Beep On/Off
1. Press [MENU/ENTER] six times. The Beep setting flashes.
2. Turn the Rotary Channel Selector at the base or press
MIC to change the setting between ON or OFF.
3. Press [MENU/ENTER] to
store the setting.
4. Press and hold
[MENU/ENTER] to
exit from the menu mode.
UNIDEN UH5045
27
on the Remote SPK/
on the Remote SPK/
UHF CB Transceiver