Figure 22
Lubrication
Greasing the Bearings
Service Interval: Every 25 hours—Grease all the lubrication
points.
Grease Type: No. 2 General Purpose, Lithium-Base Grease
1. Park the machine on a level surface, and disengage the
blade-control switch.
2. Ensure the parking brake is engaged, stop the engine,
remove the key, and wait for all moving parts to stop
before leaving the operating position.
3. Clean the grease fittings
a rag.
Note: Make sure to scrape any paint off of the front
of the fitting(s).
1. Front caster tire
25
(Figure 23
and
Figure
Figure 23
24) with