Adjusting The Height-Of-Cut; Positioning The Seat; Positioning The Steering Wheel - Toro 74785 Operator's Manual

Hide thumbs Also See for 74785:
Table of Contents

Advertisement

5. When finished mowing, remove the KeyChoice key
(Figure
6).
Note: Once you deactivate the interlock, it stays in
this mode—with your mower blade or PTO powered
attachment operating whenever you back up—and the
console light stays on until you either disengage the
PTO or turn off the engine.

Adjusting the Height-of-Cut

Note: The transport position is the highest height-of-cut
position or cutting height 115 mm (4.5 inches) as shown in
Figure
14.
Figure 14

Positioning the Seat

A
C

Positioning the Steering Wheel

The steering wheel has 3 positions for operation and one,
full-up position. Use the full-up position for stepping on and
off the machine and getting out of the seat. When operating
the machine, position the steering wheel where you have the
best control of the machine and are most comfortable.
1. Press your foot onto the steering-column release lever.
2. Position the steering wheel to the desired position
(Figure
16).
A
B
g027751
19
B
Figure 15
Figure 16
g027249

Advertisement

Table of Contents
loading

This manual is also suitable for:

Timecutter sw 4200

Table of Contents