Servicing The Engine Oil - Toro 74785 Operator's Manual

Figure 25
1. Air-cleaner latch
2. Engine

Servicing the Engine Oil

Oil Type: Detergent oil (API service SJ or higher)
Crankcase Capacity: 1.9 L (64 oz) when the filter is changed
Viscosity: See the table below.
0
0
Figure 26
g029428
3. Paper element
4. Air-cleaner base
SAE 30
50
g017552
Checking the Engine-Oil Level
Service Interval: Before each use or daily—Check the
engine-oil level.
1. Park the machine on a level surface, disengage the
blade-control switch, stop the engine, and remove the
key.
2. Make sure the engine is stopped, level, and is cool, so
the oil has time to drain into the sump.
3. Check the engine-oil level
A
D
C
F
Changing the Engine Oil and the
Engine-Oil Filter
Service Interval: Every 100 hours—Change the engine oil
and the engine-oil filter.
Note: The drain plug is attached to the drain hose.
Note: Dispose of the used oil at a recycling center.
Fill with oil as specified in the "Viscosity Grades" table
(Figure 26).
1. Park the machine, so that the drain side is slightly lower
than the opposite side, to ensure that the oil drains
completely.
27
(Figure 27).
B
E
G
H
Figure 27
g027515