Toro Riding Mower Safety - Toro 74785 Operator's Manual

•
Never interfere with the intended function of a safety
device or to reduce the protection provided by a safety
device. Check their proper operation regularly.
•
Keep the machine free of grass, leaves, or other debris
build-up. Clean up oil or fuel spillage fuel soaked debris.
Allow the machine to cool before storing.
•
Stop and inspect the equipment if you strike an object.
Repair, if necessary, before restarting.
•
Never make any adjustments or repairs with the engine
running.
•
Grass catcher components are subject to wear, damage
and deterioration, which could expose moving parts or
allow objects to be thrown. Frequently check components
and replace with manufacturers' recommended parts,
when necessary.
•
Mower blades are sharp and can cut. Wrap the blade(s) or
wear thickly-padded gloves, and use extra caution when
servicing them.
•
Check for proper brake operation frequently. Adjust and
service as required.
•
Maintain or replace safety and instruction decals as
necessary.
•
Use only genuine Toro replacement parts to ensure that
original standards are maintained.

Toro Riding Mower Safety

The following list contains safety information specific to Toro
products or other safety information that you must know that
may not be included in the ANSI standards.
•
Stop the engine, ensure the brake is engaged, disengage
the blade control switch, remove the key and disconnect
the spark plug wire(s) before performing any service,
repairs, maintenance or adjustments.
•
Keep hands, feet, hair, and loose clothing away from
attachment discharge area, underside of mower and any
moving parts while engine is running.
•
Do not touch equipment or attachment parts which may
be hot from operation. Allow to cool before attempting
to maintain, adjust or service.
•
Battery acid is poisonous and can cause burns. Avoid
contact with skin, eyes, and clothing. Protect your face,
eyes, and clothing when working with a battery.
•
Battery gases can explode. Keep cigarettes, sparks and
flames away from battery.
•
Use only Toro approved attachments. Warranty may be
voided if used with unapproved attachments.
•
If loading the machine onto a trailer or truck, use a single,
full-width ramp only. The ramp angle should not exceed
15 degrees.
6