Using The Aux Key - One for All URC-44 User Manual & Code Book

Using the AUX Key

The AUX key on your ONE FOR ALL 4 Digital can only be used to
control a second Television, Video Recorder or DVD Player, Satellite
Receiver or Cable Converter.
Example: To set up the AUX key to control a second TV:
1
2
3
4
5
6
_ _ _ _
7
Make sure you write down your code in the boxes provided
inside the battery compartment and on page 11 for easy future
reference.
Important notes:
- To set up a second Video Recorder or DVD Player, follow the same
instructions above, only press the VCR key instead of TV during step 2.
- To set up a second Satellite or Cable Converter, follow the same
instructions above, only press the SAT key instead of TV during step 2.
28
Advanced Features
Press and hold down the MAGIC key until the
device key blinks twice (the device key will blink
once, then twice).
Press 9 9 2 TV AUX. The device key will blink
twice. The AUX is now defined as a TV key.
Find your Television code in the Set-Up Code
section (starting on page 11). Codes are listed by
brand name. The most popular code is listed first.
Make sure your Television is switched on (not in
standby).
Press and release your ONE FOR ALL 4 Digital's
AUX key.
Press and hold down the MAGIC key until the
ONE FOR ALL 4 Digital's device key blinks twice
(the device key will blink once, then twice).
Enter your four-digit TV code using the number
keys. The device key will blink twice.
Now, aim your ONE FOR ALL 4 Digital at your
Television and press POWER. If your Television
switches off, your device key is ready to run your
Television. When you want to control your second
TV, press AUX first.
WWW.ONEFORALL.COM