The Search Method - One for All URC-44 User Manual & Code Book

One for all 4 digital
Table of Contents

Advertisement

The Search Method

If your Television, Video Recorder or DVD Player, Satellite or Cable
Converter does not respond to the ONE FOR ALL 4 Digital after you
have tried all the codes listed for your brand, try searching for your
code. The Search Method allows you to find the code of your device by
scanning through all the codes contained in the memory of the ONE
FOR ALL. The Search Method may also work if your brand is not listed
at all.
Example: to search for your TV code:
1
2
3
4
5
6
The ONE FOR ALL remote should now be ready to operate your
7
device. Turn your device back on (you may need to press a
number key instead of POWER) and try all the remote's functions
to ensure they are working properly. If some of the ONE FOR
ALL's commands are not operating correctly, try the search
method again. You may be using the wrong code.
Important notes:
- To search for the code for your Video Recorder or DVD Player, Satellite or
Cable converter follow the instructions above only press VCR or SAT during
steps 2 and 5.
- If your Video's original remote control does not have a POWER key, press
PLAY instead of POWER when searching for your code.
Make sure a cassette is inserted.
- During step 5, you may have to press these keys many times (up to 200!) so
be patient. Remember you must aim the ONE FOR ALL at your device the
entire time you are searching for your code.
WWW.ONEFORALL.COM
Installation
Switch your Television on (not in standby) and aim
your ONE FOR ALL at your TV.
Press the TV key on your ONE FOR ALL 4 Digital.
Press and hold down MAGIC until the device
key blinks twice (the device key will blink once
then twice).
Press 9 9 1. The device key will blink twice.
Now, slowly alternate between TV and POWER,
over and over, until your Television turns off. You
may have to press these keys many times, so
please be patient. Remember to keep pointing
the ONE FOR ALL 4 Digital at your Television
when you press the POWER and TV keys.
As soon as your Television turns off,
press MAGIC. The device key will blink twice.
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Urc-7541Urc-7544

Table of Contents