Sleeptimer - One for All URC-44 User Manual & Code Book

Sleeptimer

Sleeptimer is a feature which comes built into many TVs and Satellites.
It allows you to set your device to turn off within a certain amount of
time. This feature is very useful if, for example, you enjoy falling asleep
with your television on.
With the ONE FOR ALL, there are two ways to use Sleeptimer. If your
TV or Satellite came with this feature built in, follow the instructions
"Device Sleeptimer" below. If your device did not come with this
feature, follow the instructions "ONE FOR ALL Sleeptimer".
Device Sleeptimer
If your TV or Satellite has a "Sleeptimer" function built in, you can
access this function with your ONE FOR ALL remote. To do so:
1
Make sure your TV (or Satellite) is switched on.
2
or
3
To deactivate the Sleeptimer, repeat steps 1-3 above. During step 3,
continue pressing Power (within 5 seconds) until the timer indicates
zero minutes.
Important notes:
- Remember, your device must have its own Sleeptimer function in order for
the above instructions to operate. If your device does not have its own
Sleeptimer, follow the instructions outlined on the next page.
- Depending on how you used sleeptimer on the original remote, you might
need to access sleeptimer in a different way (through MENU for example).
26
Advanced Features
Press the device key (TV or SAT).
Point the ONE FOR ALL at your TV (or Satellite)
and press and release MAGIC then press POWER.
You should see the Sleeptimer activate on your TV
screen.
To increase the timer, simply press POWER again
(within 5 seconds) until the timer gets to the
desired time.
WWW.ONEFORALL.COM