Using The Aux Key; Changing A Device Key; Quick Code Reference - One for All URC-7542 Owner's Manual

Example:
To program a second television on the AUX key, you need to change the
AUX key into a TV key, so press:
1 (*)
The AUX key has now become a second TV key.
2 Now enter the SET-UP code for your second TV by pressing:
(*) Hold down the MAGIC key until the red light blinks twice
(the red light will blink once then twice).
(**) The red light blinks twice.
It is possible to change any device key.
Example :
To program a second Video Recorder on the SAT key (for example), you
need to change the SAT key into a VCR key, so press:
1 (*)
The TV key has now become a second VCR key.
2 Now enter the SET-UP code for your second VCR by pressing:
(*) Hold down the MAGIC key until the red light blinks twice
(the red light will blink once then twice).
(**) The red light blinks twice.
Resetting a Device Key
Example: To reset the SAT key press:
(*)
(*) Hold down the MAGIC key until the red light blinks twice
(the red light will blink once then twice).
(**) The red light blinks twice.
Write down the codes for your devices in the boxes below and in
the battery compartment for quick and easy reference.
Device Type
1._________________________
2._________________________
3._________________________
4._________________________
8

Using the AUX key

(*)

Changing a Device Key

(*)

Quick Code Reference

_ _ _ _
(4-digit TV SET-UP code)
_ _ _ _
(4-digit VCR SET-UP code)
Code
(**)
(**)
(**)
WWW.ONEFORALL.COM
(**)
(**)