Setting Up Your Other Devices - One for All URC-44 User Manual & Code Book

One for all 4 digital
Table of Contents

Advertisement

Setting Up Your Other Devices

To set up the ONE FOR ALL 4 Digital for your Television, Video
Recorder or DVD Player, Satellite Receiver or Cable Converter, follow
the instructions below.
Example: to set up the ONE FOR ALL for your TV:
1
2
3
4
_ _ _ _
5
6
If your device (television) does not respond to the code
entered, follow steps 1-5 with each code listed for your
brand. If none of the codes listed for your brand operate
your device (television), or if your brand is not listed at
all, try the search method described on page 9.
Write your code in the four boxes provided in the battery
7
compartment and on page 11 for easy future reference.
Important notes:
- Some codes are quite similar. If your device does not respond or is not
functioning properly with one of the codes, try another code listed under
your brand.
- For VCR setup: If your VCR's original remote control does not have a
POWER key, press PLAY instead of POWER during step 5.
- Remember to press the correct device mode key before operating your
device. Only one device can be assigned to each device mode key. If your
original remote control operates more than one device, you need to set up
each device separately.
Devices can be found under the following keys:
Television
To set up for a second TV, VCR/DVD or SAT/CBL (See Changing the
Mode of a Device Key, Page 29).
(*) To use the AUX key (see page 28).
8
Installation
Find your Television code in the
Set-Up Code section (starting on page 11). Codes
are listed by brand name. The most popular code
is listed first. Make sure your Television is
switched on (not in standby).
Press and release your ONE FOR ALL 4 Digital's TV
key.
Press and hold down the MAGIC key until the
device key blinks twice (the device key will blink
once, then twice).
Enter your four-digit TV code using the number
keys. The device key will blink twice.
Now, aim the ONE FOR ALL 4 Digital at your
Television and press POWER. If your Television
switches off, your ONE FOR ALL 4 Digital should
be ready to run your Television.
Video Recorder/DVD
Satellite Receiver /
Cable Converter
(*) Television /
(*) Video Recorder /
(*) Satellite Receiver/
Cable Converter
WWW.ONEFORALL.COM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Urc-7541Urc-7544

Table of Contents