Using The Aux Key - One for All SPORT User Manual & Code Book

Setting Up the ONE FOR ALL

Using the AUX Key

The AUX key on your ONE FOR ALL can be used to control a
second Television, Video Recorder or Satellite Receiver.
To set up the AUX key to control a second TV:
1
Press and hold the SET key until the
SET
red light blinks twice (the light will blink
once then twice).
2 Press 9 9 2 TV AUX.
TV
AUX
3 Find your Television code in the Set-Up
Code section (starting on page 19). Codes
are listed by brand name. The most
popular code is listed first. Make sure
your Television is switched on.
4 Press and release your ONE FOR ALL's
AUX
AUX key, then press and hold the SET
key until the ONE FOR ALL's red light
SET
blinks twice.
5
Enter your three-digit TV code using
the number keys. The red light will blink
twice.
6 Now, aim your ONE FOR ALL at your
Television and press POWER. If your
Television switches off, your ONE FOR
ALL is ready to run your Television. When
you want to control your second TV,
press AUX first.
Important notes:
- To set up your Video Recorder or Satellite, follow the same
instructions above, only press the VCR or SAT key during
step 2.
- To set up your Cable Box, follow the instructions above
only press the SAT key during step 2 and 4.
- If your Video's original remote control does not have a
power key, press PLAY instead of POWER during step 6.
- If your device does not respond, follow steps 3 - 6 with
each code listed for your brand. If none of the codes listed
for your brand operate your Television, Video Recorder or
Satellite Receiver, then try the search method described on
page 14, even if your brand is not listed at all.
6