Search Method - One for All URC-6210 Instruction Manual

Search Method

If your Television does not respond to the ZAPPER after trying all the codes
listed for your brand, try searching for your code. To search for your TV code:
1 Turn on your TV.
2 Press and hold the MAGIC key until the LED blinks twice
(The LED underneath the POWER key will blink once then twice).
3 Next, press the MUTE, CHANNEL -, CHANNEL -.
4 Point the ZAPPER at your television. Next, alternate between POWER and
CHANNEL - until your Television turns off. You may have to press these
keys many times (up to 150!), so please be patient. Remember, you must
aim the ZAPPER at your device the entire time you are searching for your
code.
5 When your device turns off, press and release MAGIC to store the code.
The ZAPPER should now be ready to operate your Television. Turn your
device back on and try all the remote's functions to ensure they are
working properly. If some of the ZAPPER'S commands are not operating
correctly, try the search method again, you may be using the wrong code.
6
WWW.ONEFORALL.COM