Vitek VT-3460 BK Manual Instruction page 7

2. To repeat all tracks on the disc press the
PLAY MODE button twice, the non- flashing
"REP" symbol will appear on the display.
To cancel the repeat mode, press the PLAY
MODE button till the repeat symbol disappears.
Random playback
1. To random playback all tracks on the disc,
press the PLAY MODE button thrice in the
stop mode, the "RAND" symbol will appear
on the display. Press the PLAY/PAUSE but-
ton, random playback of the tracks will start.
2. To cancel random playback of all tracks,
press the PLAY MODE button once again, the
"RAND" symbol will disappear.
PROGRAMMING THE PLAYBACK
You can program playback of tracks (max. 20) in
the desired order.
1. When the playback of a disc is stopped,
press the PROGRAM button once. The
"PROG" symbol and the track number will be
flashing on the display.
2. Select the desired track, consequently press-
ing the or buttons.
3. To store the selected track press the PRO-
GRAM button. The number of the track will
increase automatically "Р02".
4. Programming of the next track: select the
next track, consequently pressing the
3460IM.indd 7 3460IM.indd 7
buttons. Then press the PROGRAM button to
store the selected track in memory. You can
program up to 20 tracks
5. To playback programmed tracks, press the
PLAY/PAUSE button.
Note: if the programming exists, press the
PLAY/PAUSE button to resume playback
6. To cancel program mode press the STOP but-
ton twice or open the disc slot lid, or select
another mode by using the FUNCTION button
(the "PROG" symbol will disappear).
Playback of МР3 discs
This unit can playback most of MP3 discs but
there are cases when the disc is not played back
due to the settings of the software used for re-
cording this disc. (For instance, if the finalization
of a disc is absent.)
1. Switch on the unit.
2. Consequently press the FUNCTION button
to select the disc playback mode, the "CD
READ" symbols will be flashing on the dis-
play. If there is no disc in the disc slot, the
"NO DISC" symbols will appear on the dis-
play.
3. Open the disc slot. Inset a disc and close the
disc slot. Make sure that the disc is set prop-
erly – with the label upwards.
4. Use the FOLDER UP button to select the de-
sired folder in the stop mode. Use the
buttons to select the desired track. Press
the PLAY/PAUSE button to playback the de-
sired track.
5. To pause the playback, press the PLAY/
or
PAUSE button in the playback mode, the
7
ENGLISH
or
03.02.2010 12:56:42 03.02.2010 12:56:42