How To Connect Your Extended Power Cables - Samsung AF28FVSDA Series User & Installation Manual

How to connect your extended power cables

f Items to prepare f
Tools
Spec
Shape
1. As shown in the figure, peel off the shields from the rubber/wire of the power
cable.
- Peel off 20 mm of the wire shields of the tube installed already.
2. Insert both sides of core wire of the power cable into the connection sleeve.
f Method 1 f
Push the core wire in to the sleeve from both sides.
• After peeling off the tube wire, you must insert a contraction tube.
CAUTION
f Method 2 f
Twist the wire cores together and push it in to the sleeve.
3. Using a compressor, compress the two points and flip it over and compress another two points in the same location.
- The compression dimension should be 8.0.
- After compressing it, pull both sides of the wire to make sure it is firmly pressed.
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 47
Crimping plier Connection sleeve (mm)
MH-14 20 x Ø6.5(H x OD)
f Method 1 f
Comp. dim.
Compress it 4 times
5 mm
Insulation tape Contraction tube (mm)
Width 19 mm 70 x Ø8.0(L x OD)
Power cable(provided by us)
20 20
120
180
20
Power cable (provided by us)
Connection sleeve
Connection sleeve
f Method 2 f
Compress it 4 times
5 mm
2014-10-28 오후 12:01:03
(Unit: mm)
20
60
47