Smart Sensor Operation; Lighting Function - Samsung AF28FVSDA Series User & Installation Manual

Smart sensor operation

In Cool mode, camera on the top of the indoor unit will detect the movement within the indoor and when there is no
movement for certain time, air conditioner will adjust the indoor temperature or turn off power automatically.
Press the button during Cool mode.
❋ ❋ Applicable to AF✴✴FVSD✴✴✴ only
WPS
Wi-Fi
<Remote controller display>
<Indoor unit display>

Lighting function

You can create fresh mood of indoor room with soft light by turning the light on.
After pressing the
to adjust the lighting level of an indoor unit.
Lighting
<Remote controller display>
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 25
f f icon appears on the remote controller display and the
indoor unit display.
f When the movement is not detected for 1 hour, temperature will be adjusted f
automatically.
f When the movement is not detected for 2 hours, air conditioner will turn off f
automatically.
Cancel Press the Smart Sensor button once again.
• Smart sensor will detect about 25° on the left and right side of the product.
• In dark places, camera cannot detect the movement and Smart sensor function
NOTE
may not work properly.
• Smart sensor mode may get disturbed by change of light or movement
change caused by devices such as TV, fan...etc.
button and checking the
f Each time you press the Lighting button during air conditioner operation, the f
lighting level will be adjusted. (The lighting function will work only with opened air
outlet.)
f When changing the lighting level, press the 2 f
Lighting button repeatedly to adjust the desired level.
Press times
1
2
3
4
• The lighting figure may change depending on the status of air conditioner
operation.
NOTE
• The lighting figure will differ depending on the models.
• The use of lighting function will be different depending on the model.
• When the air conditioner is turned off, the reception sound will be ringing from
the air conditioner but the lighting function will not operate.
indicator on the remote controller display, press the
F button first and then press the
nd
icon appears on the
button
Lighting
Brightness
Level 1 (Low)
Off
Level 3 (High)
Level 2 (Medium)
25
2014-10-28 오후 12:00:53