Troubleshooting - Samsung AF28FVSDA Series User & Installation Manual

Troubleshooting

Refer to the following chart if the air conditioner operates abnormally. This may save time
and unnecessary expenses.
PROBLEM
The air
conditioner
does not work
at all.
Front panel
remains open.
The temperature
adjustment is
not working.
Cool air does not
come out of the
air conditioner.
Air flow
adjustment is
not working.
Fan speed
adjustment is
not working.
30
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 30
• Check power status and then operate the air conditioner again.
• Switch on the circuit breaker and then operate the air conditioner
again.
• Check if the air conditioner is turned off by Off timer or Smart sensor.
Operate the air conditioner again by pressing the Power
• Check if there is a power failure.
• Check if there is any object blocking the front panel from closing.
Remove the object and then operate again.
• Check if you have selected Turbo/Purity mode. In these modes,
temperature adjustment is not available.
• Check if the set temperature is higher than the current temperature.
• Check if the Full HD filter is blocked by dirt. If there is a lot of dust on
the Full HD filter, cooling performance may decrease. Clean them
frequently.
• Check if the outdoor unit is covered or installed near the obstacle.
Take the cover off and take the obstacle away.
• If you want to operate the air conditioner in the sunlight, cover the
outdoor unit using curtains or etc.
• If the doors or windows are open, it may cause poor cooling
performance. Close the doors and windows.
• If you have selected Purity mode without selecting other mode, cool
air does not come out of the air conditioner. Press the Mode button
to select other mode.
• Check if the pipe length is too long. When the pipe length exceeds
maximum allowable pipe length, cooling performance may
decrease.
• Check if you have selected good'sleep mode. In this mode, you
cannot adjust the air flow direction since it is set to Auto.
• Check if you have selected Dry/Turbo/good'sleep mode. In these
modes, fan speed is set to Auto and you cannot adjust the fan speed.
SOLUTION
button.
2014-10-28 오후 12:00:55