Checking The Remote Controller - Samsung AF28FVSDA Series User & Installation Manual

Checking the remote controller

Function may be different depending on the model.
f Point the remote controller towards the remote control receiver of the unit. f
f When the button is pressed, you will hear ringing or beep sound and Transmit indicator ( f
controller display.
Remote controller buttons
Remote controller display
Turn on/off the air conditioner
Select Zero filter and Virus doctor
Smart Sensor
Select Smart sensor mode
Increase/Decrease the temperature
Set the good'sleep mode on
Activate auto clean function to dry inside
of the indoor unit (to get rid of odor)
Set lighting of indoor unit
Set the On timer on
[2
Select the function underneath a button
• 2 F button: When pressing the 2
nd
NOTE
select the below function of a button.(e.g. When pressing
If you press the 2
display will disappear and you can select the function of the button.
16
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 16
Power
Purity
Temp + –
by 1 ˚C
good'sleep
Auto Clean
Lighting
Lighting
On Timer
nd F] button
F button,
nd
F, Power, Purity and the Set/Cancel button or don't press any buttons for 10 seconds, the
nd
Mode
Select one of the 5 operation modes
Turbo
Operate in maximum fan speed to cool
quickly
Solo/Family
Select Solo/Family mode
Air Flow
Set the air flow to cool effectively
according to the surrounding
WPS Wi-Fi
Fan
Adjust how much air flows through the
air conditioner with the 4 different fan
speeds
Quiet
Reduced noise is generated during
operation
Beep Off
To silence the beep sound when pressing
the button
Set/Cancel
Set/Cancel the timer/good'sleep mode
Off Timer
Set the Off timer on
will appear on the remote controller display and you can

, you can select the Lighting function.)
Lighting
) will appear on the remote
2014-10-28 오후 12:00:49