Remote Controller Display - Samsung AF28FVSDA Series User & Installation Manual

Remote controller display

❋ ❋ Heat mode will be displayed on the remote controller and reception sound will be ringing but
the air conditioner will not operate the heat mode. When you select heat mode with a remote
controller and you turn the air conditioner off and on, the air conditioner will operate with auto
mode and heat mode will be displayed on the remote controller. Change the operation mode of a
remote controller.
❋ ❋ Left fan and right fan will be displayed as not supported function and reception sound will be
ringing. However, the left and right fans will not operate.
Battery changing time
When the battery is exhausted,(
the remote controller display. When the icon appears,
change the batteries. The remote controller requires two
1.5V AAA type batteries.
Storing the remote controller
When you do not use the remote controller
for a long time, remove the batteries from the
remote controller and store it.
• Make sure that water is not allowed to enter the remote controller.
CAUTION
• There is a possibility that the air conditioner will not operate by remote controller near strong light such as a
fluorescent lamp or neon sign. In this case, use the remote controller in front of the remote controller receiver of
NOTE
the indoor unit.
• If other electrical products are operated by the remote controller, call your nearest service center.
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed
of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb
indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If
batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and
recycle them through your local, free battery return system.
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 17
Operation mode
indicator
Set temperature/
Time indicator
On/Off Time indicator
Air flow direction
indicator
)will be displayed in
WPS Wi-Fi
Lighting
Transmit indicator
Low battery indicator
Fan speed indicator
Inserting the batteries
1. Open the battery cover.
f Push the ( f
) part in the
direction of the arrow and lift up
the cover.
2. Insert the batteries.
f Check and match the (+), (-) f
signs and insert them in correct
position.
3. Close the battery cover.
f Match the cover and bottom part f
of the remote controller and press
it until you hear click sound.
Correct disposal of batteries in this product
Auto
Low
Medium
High
17
2014-10-28 오후 12:00:50