Table of Contents
Advertisement
How to connect your extended power cables
e t I s to prepare
m
(compressor and insulation tape should be prepared by an installation technician.)
Tools
Crimping plier
Spec
MH-14
Shape
1.
of the power cable.
-
• After peeling
the tube wire, you must insert a contraction tube.
2. Insert both sides of core wire of the power cable into the connection sleeve.
3.
and compress another two points in the same location.
- The compression dimension should be 8.0.
A - er compressing it, pull both sides of the wire to
t f
4. Wrap it with the insulation tape twice and position your
contraction tube in the middle of the insulation tape.
5. Apply heat to the contraction tube to contract it.
6. After tube contraction work is completed, wrap it with the
• In case of extending the electric wire, please DO NOT use a round-shaped pressing socket.
-
38
Connection sleeve (mm)
Insulation tape
20xØ7.0(HxOD)
Width 18mm
Contraction tube (mm)
50xØ8.0(LxOD)
(Unit: mm)
Power cable (provided by us)
20
20
20
60
120
180
Wire tube power cable
20
Connection sleeve
Comp. dim.
Compress it 4 times
5mm
Insulation tape
40mm
Contraction tube
Insulation tape
Advertisement
Table of Contents
