Inputting Character Strings - Omron NT-series Operation Manual

Inputting Character Strings

Special Characters
Marks
1, 2, 3... 1.
3. If the input is correct, press the Enter Key to enter the characters and go
to the String Attributes section on page 24. Special characters or Marks
can also be input as display characters as described below.
Characters not on the keyboard can be input via character codes. A list of
character codes is provided at the end of the manual. To input a character
code, press the ALT Key followed by the decimal code.
You can input marks while inputting characters.
Press F1 (Mark) while inputting a string. The Mark List will appear.
2. Use the direction keys to select the mark you want to input, and then
press the Enter Key to enter them, or press the Escape Key to cancel
mark input and return to character input.
Section 2-1
23