Deleting Character Strings - Omron NT-series Operation Manual

Inputting Character Strings
2-1-2

Deleting Character Strings

displayed. You cannot set a display position that allows the guide box to
extend off the screen.
2. When you have set the display position, press the Enter Key.
3. You will be returned to the Initial Text Input Display, and the contents set
up to this point are displayed. At this time, a message again appears in
the command box instructing you to enter text. If you are inputting text to
different places on the same screen, repeat the operations described
above. When you have finished inputting text, press the Escape Key.
You will be returned to the Initial Edit Display.
You can delete strings that have already been set by using the procedure
given below. When you delete a string, a portion of the display may be left
empty. If this happens, press the TAB Key to rewrite the display.
Section 2-1
Guide box
Cross-shaped cursor
25