Creating Normal Bar Graphs - Omron NT-series Operation Manual

Bar Graphs
2-6-1

Creating Normal Bar Graphs

Designating Display
Position
1, 2, 3... 1.
52
If you select BAR GRPH from the Initial Edit Display, the Initial Bar Graph
Display will appear.
A bar graph is set by designating both ends (the starting and ending points)
of a diagonal line across the bar graph. It makes no difference whether the
display position of a bar graph is designated from the right or left, or from the
top or bottom. The ending point designates only the length (along the X axis)
of the bar graph. Whether the bar is vertical or horizontal is designated next
in the display settings.
Starting point
BAR GRAPH
Designate the starting point.
2. Designate the ending point.
Initial Bar Graph Display
2 bits or 255 dots (set with display setting)
Ending point
Section 2-6