Omron NT-series Operation Manual page 61

Bar Graphs
Note Negative values and initial values are set differently for direct connection.
Refer to page 61 for details.
7. Make the four settings as described in the following table. The comment
is optional and all four settings can be omitted here if desired and input
later using the table edit operation.
Heading
Initialize (Init)
Set words (St Word)
Word
Comment
The bar graph display settings will appear when the above display is left.
8. Set the way in which the display will appear on the screen.
Meaning
Set YES to initialize the contents in the numeral
table when PT power is turned ON. Set to NO to
maintain the previous value when PT power is
turned ON.
Set the number of PC words to be used.
Set the address of the first PC word to be used.
Input any desired user comment area
Section 2-6
57