Omron NT-series Operation Manual page 112

Transmitting Data
Transmitting Screens
1, 2, 3... 1.
108
6. When the transmission is complete, a message will be displayed. Press
any key to return to the File Selection Display.
You can transmit single or multiple screens.
Note 1. Errors can occur when continuous or overlapping screens are transmitted,
so check these screens carefully before sending them.
2. This operation is not possible if EEPROM is used in the PT. Transfer files
only.
Go the the Screen Selection Display.
2. If you are transmitting only one screen, move the bar cursor to the num-
ber of the screen you want to transmit, and press F6 (Transmit).
If you are transmitting multiple screens at one time, tag the screen num-
bers that you want to transmit and then press F6 (Transmit).
3. Select screen data. As the default, "Screen Data" will be displayed in
reverse video. To select screen data, just press the Enter Key.
4. Select whether or not you want to confirm the transmission, and then
press the Enter Key.
Section 6-2