Resetting To Factory Default Settings - Avigilon H4A-BO1-IR Installation Manual

Resetting to Factory Default Settings

If the camera no longer functions as expected, you can choose to reset the camera to its factory default settings.
Use the firmware revert button to reset the camera.
Figure 1: The firmware revert button in the Configuration Panel.
1. Ensure the camera is powered on.
2. Unscrew the configuration panel cover on the bottom of the camera.
3. Using a straightened paperclip or similar tool, gently press and hold the firmware revert button for 3
seconds.
4. Screw the configuration panel cover back into place.
CAUTION — Do not apply excessive force. Inserting the tool too far will damage the camera.
17 Resetting to Factory Default Settings