Table of Contents
Advertisement
Printing on special media
8
Transparency
•
Prints made on transparency film with this printer are not compatible
with overhead projectors and may appear as a black and white image if
projected.
• Prints made on transparency film with this machine are not compatible
with overhead projectors and may appear as a black and white image if
projected.
To avoid damaging the machine, use only transparencies designed for use in
laser printers.
•
Must withstand the machine's fusing temperature.
•
Place them on a flat surface after removing them from the machine.
•
Do not leave unused transparencies in the paper tray for long. Dust and dirt
may accumulate on them, resulting in spotty printing.
•
To avoid smudging caused by fingerprints, handle them carefully.
•
To avoid fading, do not expose printed transparencies to prolonged
sunlight.
•
Ensure that transparencies are not wrinkled, curled, or have any torn edges.
•
Do not use transparencies that separate from the backing sheet.
•
To prevent transparencies from sticking to each other, do not let the printed
sheets stack up as they are being printed out.
•
Recommended media: Transparency for a color laser printer by Xerox, such
as 3R 91331(A4), 3R 2780 (Letter).
75
4. Media and Tray
Advertisement
Chapters
Table of Contents
