Samsung ProXpress C268x series User Manual page 239

Machine setup
If a network connection problem persists, contact your network
administrator.
6 Enter the IP address, subnet mask, and gateway in each field. Then press
Next.
• If a new IP address is assigned automatically by a DHCP or BOOTP, press
DHCP or BOOTP.
• If you are not sure about your network environment, contact your
network administrator.
7 Enter the Host Name, Domain Name, Primary DNS Server and Secondary
DNS Server in each field. Then press Next.
8 Press the Name field.
a The admin is entered as a default. If you want to replace with
another name, remove admin and enter a new administrator name
and then press OK.
b Press the New Password field.
c Enter the password to use and then press OK. This password is to be
used for accessing the administrator account.
The password should be at least 8 characters long and it should be a
combination of letters, numbers, and special characters (except for <,>,",\).
d Press the Confirm Password field.
e Re-enter the password to confirm it, then press Next.
9 Set the time on the machine. You can set the time manually or use SNTP
(Simple Network Time Protocol) to set time automatically using the
time server.
When you press Manual:
a Set the date, time, time offset.
Example for selecting the time offset: If your local time is 4 hours faster than
UTC, press the right arrow until +4 shows.
b Press Next.
When you press SNTP (Simple Network Time Protocol):
a Set the date, time, time offset using the left/right and up/down
arrows.
Example for selecting the time offset: If your local time is 4 hours faster than
UTC, press the right arrow until +4 shows.
b If you press IP, go to step c. If you press Host, step e.
c Press the IP field. The pop-up keyboard appears. Enter a IP address
which provides the time information, and then press OK.
d Press the Port No field. The pop-up keyboard appears. Enter a port
number and then press OK.
12. Menu Overview and Advanced Features
239