Samsung ProXpress C268x series User Manual page 51

Installing driver over the network
Command- line Definition
/a"<dest_path>" or Specifies destination path
for installation.
/A"<dest_path>"
The destination
path should be a
fully qualified
path.
/n"<Printer name>" Specifies printer name.
or Printer instance shall be
created as specified
/N"<Printer name>"
printer name.
/nd or Commands not to set the
installed driver as a default
/ND
machine driver.
Description
Since machine drivers should
be installed on the OS
specific location, this
command applies to only
application software.
With this parameter, you can
add printer instances as your
wishes.
It indicates installed machine
driver will not be the default
machine driver on your
system if there are one or
more printer drivers installed.
If there is no installed
machine driver on your
system, then this option
won't be applied because
Windows OS will set installed
printer driver as a default
machine driver.
Command- line Definition
/x or Uses existing machine
driver files to create
/X
printer instance if it is
already installed.
/up"<printer Removes only specified
name>" or printer instance and not
the driver files.
/UP"<printer
name>"
/d or Uninstalls all device
drivers and applications
/D
from your system.
/v"<share name>" or Shares installed machine
and add other available
/V"<share name>"
platform drivers for Point
& Print.
/o or Opens Printers and Faxes
folder after installation.
/O
/h, /H or /? Shows Command-line Usage.
Description
This command provides a
way to install a printer
instance that uses installed
printer driver files without
installing an additional
driver.
This command provides a
way to remove only specified
printer instance from your
system without effecting
other printer drivers. It will
not remove printer driver
files from your system.
This command will remove all
installed device drivers and
application software from
your system.
It will install all supported
Windows OS platform's
machine drivers to system
and share it with specified
<share name> for point and
print.
This command will open
Printers and Faxes folder
after the silent installation.
3. Using a Network-Connected Machine
51