Samsung ProXpress C268x series User Manual page 57

Wireless network setup (Optional)
Connecting WPS
Factory default in your machine is PBC mode, which is recommended for a
typical wireless network environment.
Connecting in PBC mode
Type in the ID and Password.
Use the same login ID, Password, Domain as when logging in from the
machine (see "Log-in" on page 221.) If you want to create a new user or
change the password, see "Security tab" on page 250.
1 Press Machine Setup > Network Settings from the display screen.
2 Press Wi-Fi.
3 Press WPS > PBC.
Press Start.
4
Press the WPS (PBC) button on the access point (or wireless router).
5
Follow the instruction on the display screen.
6
The messages are displayed on the display screen
Connecting in PIN mode
Type in the ID and Password.
Use the same login ID, Password, Domain as when logging in from the
machine (see "Log-in" on page 221.) If you want to create a new user or
change the password, see "Security tab" on page 250.
1 Press Machine Setup > Network Settings from the display screen.
2 Press Wi-Fi.
3 Press WPS > PIN.
Press Start.
4
The eight-digit PIN appears on the display.
5
You need to enter the eight-digit PIN within two minutes on the
computer that is connected to the access point (or wireless router).
6 Follow the instruction on the display screen.
The messages are displayed on the display screen
3. Using a Network-Connected Machine
57