Quick copying
The Quick Copy menu allows you to quickly set copy options without having to
move to a lower level menu or another tab. But, this menu does not provide all
copy options. If you need to use other copy options, use the copy options in the
Copy menu (see "Using special copy features" on page 118).
1
Press Quick Copy from the display screen.
2
Place the originals face up in the DSDF or place a single original face
down on the scanner glass and close the DSDF (see "Loading originals"
on page 65).
3
Adjust the settings for each copy such as Reduce/Enlarge, Duplex/N-
Up, Output, Paper Source, etc.
You can set the default Quick Copy options from Machine Setup >
Application Setting > Copy Settings from the display screen. Set the most
frequently used settings.
4
Enter the number of copies using the numeric keypad on the control
panel, if necessary.
5
Press
(Start) from the control panel to begin copying.
115
6. Copying