Samsung ProXpress C268x series User Manual page 315

Understanding display messages
Message
Prepare new fuser unit The estimated life of the
fuser unit is close.
Replace with new fuser The life of the fuser unit
unit has expired.
Replace with new Tray2 The life of the tray pick-up
pickup roller roller has expired.
• Replace with new Tray The life of the tray retard
1 retard roller roller has expired.
• Replace with new Tray
2 retard roller
• Sensor Failure: [error There is a problem in the
number]. Turn off then sensor.
on. Call for service if
the problem persists
• Sensor Failure: [error
number]. Turn off then
on
Scanner is locked The scanner is locked.
Meaning Suggested solutions
Prepare a new fuser
unit for replacement,
please call for service.
Replace the fuser unit
with a new one. If the
problem persists,
please call for service.
Replace the tray pick-
up roller with a new
one. If the problem
persists, call for service.
Replace the tray retard
roller with a new one. If
the problem persists,
call for service.
Reboot the power. If
the problem persists,
please call for service.
Reboot the power. If
the problem persists,
please call for service.
Message
The room temperature is The machine is in a room
not suitable for this set with improper room
use. Please adjust room temperature.
temperature
Top door of scanner is The document feeder
open cover is not securely
latched.
UI System Failure: [error There is a problem in the
number]. Call for service UI system.
Waste toner container is The waste toner
almost full. Order new container is almost full.
one
Waste toner container is The waste toner
full. Replace it container is full and the
printer will stop printing
until a new waste toner
container is placed into
the printer.
Waste toner container is The waste toner
not installed. Install it container is not installed.
Meaning Suggested solutions
Move the machine to a
room with proper room
temperature (see
"Specifications" on
page 339)
Close the cover until it
locks into place.
Unplug the power cord
and plug it back in. If
the problem persists,
call for service.
Prepare a waste toner
container with a
Samsung-genuine
waste toner container.
Replace a waste toner
container with a
Samsung-genuine
waste toner container
(see "Replacing the
waste toner container"
on page 282).
Install the waste toner
container. If it is already
installed, try to reinstall
the waste toner
container. If the
problem persists, call
for service.
15. Troubleshooting
315