Scanning To A Usb Memory Device - Samsung ProXpress C268x series User Manual

Scanning to a USB memory device

• The machine cannot detect the unformatted USB memory device.
Format and then reinsert the USB memory device into the USB memory
port on your machine.
• The machine could not detect the USB memory device when the
machine is in power save mode. Wait until the machine returns to ready
mode, and then reinsert the USB memory device into the USB memory
port on your machine.
• The machine has two USB memory ports. When a USB memory is already
inserted to one of the ports, if you try to insert a USB memory device into
another port, the machine cannot detect the second one. Remove the
USB memory device that was inserted first and then reinsert the USB
memory device you want to use into the USB memory port on your
machine.
Insert a USB memory device into the USB memory port on your machine.
1
Place the originals face up in the DSDF or place a single original face
2
down on the scanner glass and close the DSDF (see "Loading originals"
on page 65).
3 Press Scan to USB from the display screen.
4 Press the Basic tab.
11. Using SmarThru Workflow, Shared Folder, Stored Document, and USB
213