Electrical System; Removing The Battery; Installing The Battery - KTM 1190 RC8 R Track Owner's Manual

ELECTRICAL SYSTEM

Removing the battery

x
13.1
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep the battery away from sparks or open flames. Charge only in well-ventilated areas.
–
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least
15 minutes and contact a physician.
Caution
Danger of accidents If the vehicle is operated with a discharged battery or without a battery, electronic components and safety
equipment may be damaged.
–
Never operate the vehicle with a discharged battery or without a battery.

Installing the battery

x
13.2
–
Switch off all power consumers and the engine.
–
Remove the seat. (
–
Disconnect negative (minus) cable
101230-10
–
Remove the cover of the positive terminal.
–
Disconnect the positive (plus) cable
101231-10
–
Remove screws
–
Removing the securing bracket
–
Pull the battery up and out of the battery rack.
101232-10
–
Position the battery in the battery rack.
Info
The terminals of the battery must face the rear of the vehicle.
–
Position the bracket
101233-10
p. 55)
of the battery.

of the battery.

.

.

.

76