COOLING SYSTEM
–
Remove bleeder screws
–
Add coolant until it exits from the vent hole without bubbles.
Coolant
–
Mount and tighten the bleeder screws with the seal rings.
Guideline
Remaining engine screws
Remaining chassis screws
101236-10
–
Completely fill the radiator with coolant and close it with radiator cap
–
Position the vehicle on a level surface.
–
Remove the cap of the compensating tank.
–
Add coolant to the compensating tank until the coolant reaches the specified level.
Guideline
The coolant level must be between MIN and MAX.
–
Mount the cap of the compensating tank.
101237-10
of the cylinder heads.
2.60 l (2.75 qt.)
Coolant (
Coolant (mixed ready to use)
(
p. 118)
M6
M6
82
p. 118)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
.